- Architecture, couple of new concepts with similar one in VLAN world
- VXLAN = VLAN
- VTEP = Switch
- VTI = Port
- VNI = VLAN
- 1 VNI can attach different VLANs on different VTEP
- HER (head-end replication) handles BUM traffic by using flood list
- VXLAN vs MLAG
- From downstream L2 devices perspective, MLAG peers appear as ONE single virtual switch, which is by MLAG protocol AUTOMATICALLY, like STP, system MAC, etc.
- But from upstream L3 devices, you have to configure MANUALLY to ensure one router, so the following info MUST BE SAME:
- VLAN-VNI mapping
- VTEP IP of loopback address
- Flood VTEP list
- And be careful:
- OSPF ID must be manually configured to avoid duplicated to confuse the routing
- On DCS-7050X platform (Trident II ASIC), need a recir interface to process the packets twice in case of VXLAN routing.
Disclaimer: The information contained in this blog is for informational purposes only and should not be considered as official documentation on any subject matter. The postings on this blog are my own and do not necessarily represent the opinions of my current and previous employers.
4/14/2018
Notes of EOS VXLAN Chapter
EOS VXLAN Chapter
Labels:
VXLAN
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment